Galvanised Steel Binding Wire

Finish: Electro galv. iron wire, hot dip galv., galvanized annealed.
Forms of Supply: Cut wire, U type, loop ties or coil wire. Flat wire or round wire.
Popular Gauges:

1. 16 Gauge
2. 18 Gauge
3. 20 Gauge
4. 21 Gauge
5. 22 Gauge

Product Variety

Galvanized Steel Rebar Ties in Coil (SWG 14, 16, 18 & 20 Gauge)

16 Gauge G.I Binding Wire 5 Kg Roll

16 SWG Electro Galvanized Steel Binding Wire

Wire diameter: 1.626 mm
Material: Low Carbon Steel Wire with Zinc Coating 10-12 g/m2
In 7kg rolls

 

14 Gauge G.I Binding Wire for Reinforcing Steel Bar Bundling

No. 14 gauge electro galvanised binding wire, for reinforcement fixing

1mm Galvanized Binding Wire

zinc coated 15 grm
Diameter: 1 mm
In rolls: 1.5 kg
Packing: Each 10 rolls in one bundle

1.6mm U type bent mild steel binding wire, hot dip galvanized finish, in bundles

 

Galvanized (G.I) Binding Wire 21 Gauge, 3 Kg / Roll
No 9 Gauge fasteners / hardware 100 lb full roll,for iron rods
Binding wire 0.8mm, electro-galvd. annealed, 10kg per coil.

Galvanized Binding wires and Wood Nails

Galvanized Binding wires with diameters of 16mm and 20mm
Binding wire ( 21 gauge, Galvanized) & Wood Nail 2.5 inch

Cut Wire Type Galvanized and annealed with added corrosion protection. Available in 14, 15, 16, 17, 18, 20 Gauge

18 gauge g.i. wire for tying deformed steel bars in the construction field.

Binding Wire in Both Galvanized and Black Steel

Galvanized and Non Galvanized (3KG/Bundle), 0.3 to 5m long Pre cut; pvc coated / galvanized / straight cut wire, SIZE: 21 SWG, 3kg / bundle, or 25 Kgs Bundles.

Hot Dip Galvanized Wire for Binding
Made of steel rod from Silicon killed steel not Rimming Steel, re zinc adhesion
Heavily Galvanised to B.S. EN 10244 –2 CLASS A
Zinc coating should be well adhered and pass wrap test
Tensility must be consistent throughout load and not vary by more than 100 n/mm2
Alternative coating to B.S. E.N. 10244 – 2 CLASS A
Smooth surface with no lumpy zinc
Fully annealed and marked on the coil
Produced in one tonne plus rota laid coils, securely plastic banded
Coils must be free running without tangles
Packing: Export seaworthy packing.
Certificates: SGS, ISO Certificate, Mill Test Certifcate.

Rebar tie wire, galvanized, guage 18 - 20, in 25 kgs coil.

PVC Coated Galvanized Tie Wire / 3.5lb Spool Wire
Rebar ties in reinforced concrete construction for binding reinforcing steel rods.

16, 16.5 & 14 gauge Tie wire, pvc wire or black annealed rebar tie wire, in 3.5lb spool or reels.
Export to USA.

0.9mm Rebar Loop Ties (Double Loop Ends) Annealed Galvanized

Mainly used for tying reinforcing bar for the construction works
0.9-1.0mm
20" rebar loop tie wire.
Annealed and Galvanised.

Technical Specification

Taschkent Specification Reference